User guide

Appendix
305
Parameter
Permitted
Values
Descriptions
Web Setting Path
SIP-T41P/T27P: X ranges from 1 to 6.
SIP-T23P/G: X ranges from 1 to 3.
SIP-T21(P) E2: X ranges from 1 to 2.)
key, dials out a call or off hook the phone
using account X.
0-Disabled
1-Enabled
If it is set to 1(Enabled), the phone will first
dial out a pre-configured number (configured
by the parameter
―account.X.auto_dial_num‖) when a user
presses the speakerphone key or desired line
key, dials out a call or off hook the phone
using account X.
The default value is 0.
Note: The server may prompt the user to enter
an activation code to use this account for call
service. This feature requires support from the
SIP server.
account.X.auto_dial_num
(SIP-T48G/T46G/T29G: X ranges from 1 to 16.
SIP-T42G: X ranges from 1 to 12.
SIP-T41P/T27P: X ranges from 1 to 6.
SIP-T23P/G: X ranges from 1 to 3.
String within
32 characters
It configures the number that the IP phone first
dials out when a user dials out a call using
account X.
The default value is blank.
Note: It works only if the value of the
parameter ―account.X.auto_dial_enable‖ is