User guide

Appendix
255
Parameter
Permitted
Values
Descriptions
Web Setting Path
If it is set to 0 (Disabled), neither ―#‖ nor ―*‖
can be used as a send key.
If it is set to 1 (# key), the pound key is used as
the send key.
If it is set to 2 (* key), the asterisk key is used
as the send key.
The default value is 1.
Note: The old parameter
―features.pound_key.mode‖ is also
applicable to IP phones.
features.send_key_tone
0 or 1
It enables or disables the IP phone to play a
key tone when a user presses a send key.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will play
a key tone when a user presses a send key.
The default value is 1.
Note: It works only if the value of the
parameter ―features.key_tone‖ is set to 1
(Enabled).
Features->Audio->Send Sound