User guide

Yealink IP Phones Auto Provisioning Guide
248
Parameter
Permitted
Values
Descriptions
Web Setting Path
features.intercom.barge
0 or 1
It enables or disables the IP phone to
automatically answer an incoming intercom
call while there is already an active call on
the IP phone.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone will
handle an incoming intercom call like a
waiting call while there is already an active
call on the IP phone.
If it is set to 1 (Enabled), the IP phone will
automatically answer the intercom call while
there is already an active call on the IP phone
and place the active call on hold.
The default value is 0.
Note: It works only if the value of the
parameter ―features.intercom.allow‖ is set to
1 (Enabled).
Features->Intercom->Intercom Barge
features.hotline_number
String within
32 characters
It configures the hotline number that the IP
phone automatically dials out when lifting the
handset, pressing the speakerphone key or
the line key. Leaving it blank disables hotline
Features->General Information->
Hotline Number