User guide

Getting Started

integrated in the icon when the new language is selected.

To use the custom language for the IP phone, you also need to configure the following

parameter:

#Configure the custom language (e.g., English) for the web user interface.

lang.wui = English

#Delete all custom languages.

wui_lang.delete = http://localhost/all

Yealink IP phones allow you to customize the logo displayed on the LCD screen. Logo is

not applicable to SIP-T48G, SIP-T46G and SIP-T29G IP phones. These three IP phone

models use the wallpaper instead.

The following table lists the supported logo file format and resolution for each phone

model:

Phone Model

Logo File Format

Resolution

SIP-T42G/T41P

.dob

<=192*64 2 gray scale

SIP-T27P

.dob

<=240*120 2 gray scale

SIP-T23P/T23G/T21(P) E2

.dob

<=132*64 2 gray scale

For more information on customizing a logo file, refer to Customizing a Logo File Using

PictureExDemo on page 81.

You can customize a *.dob logo file, upload the logo file to the provisioning server and

then specify the access URL in configuration files:

####################################################

## Configure the custom Logo File ##

####################################################

#Specify the access URL of the custom Logo File.

lcd_logo.url =

For example, enter ―tftp://192.168.1.100/logo.dob‖ in the ―lcd_logo.url =‖ field. During

the auto provisioning process, the IP phone connects to the provisioning server

―192.168.1.100‖, and downloads the logo file ―logo.dob‖.

To use the custom logo, you also need to configure the following parameter:

#Configure the logo mode.

#0-Disabled, 1-System logo, 2-Custom logo

For existing language files, ―X‖ ranges from 1 to 11. For custom language files, X must

start from 12 ―Y‖ means the language name.

To modify translation of an existing language, do not rename the language file.