User guide

Yealink IP Phones Auto Provisioning Guide
218
Parameter
Permitted
Values
Descriptions
Web Setting Path
For more information, refer to Yealink IP
phones Administrator Guide.
distinctive_ring_tones.alert_info.X.ringer
(X ranges from 1 to 10)
Integer from 1
to 10
It configures the desired ring tone for each
text. The value ranges from 1 to 10, the digit
stands for the appropriate ring tone.
The default value is 1.
For more information, refer to Yealink IP
phones Administrator Guide.
Settings->Ring->Internal Ringer File
auto_redial.enable
0 or 1
It enables or disables the IP phone to
automatically redial the dialed number when
the callee is temporarily unavailable.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will dial
the previous dialed out number automatically
when the dialed number is temporarily
unavailable.
The default value is 0.
Features->General
Information->Auto Redial
auto_redial.interval
Integer from 1
to 300
It configures the interval (in seconds) for the IP
phone to wait between redials.
The IP phone redials the dialed number at
Features->General
Information->Auto Redial Interval
(1~300s)