User guide

Appendix
129
Parameter
Permitted
Values
Descriptions
Web Setting Path
It takes effect after a reboot.
syslog.server
IP address or
domain name
It configures the IP address or domain name
of the syslog server when exporting log to the
syslog server.
The default value is blank.
It takes effect after a reboot.
Note: It works only if the value of the
parameter ―syslog.mode‖ is set to 1 (Syslog
Server).
Settings->Configuration->Server
Name
syslog.log_upload_period
Integer from
30 to 2592000
It configures the period of the log upload (in
seconds) to the provisioning server.
The default value is 30.
It takes effect after a reboot.
Note: It works only if the value of the
parameter ―syslog.mode‖ is set to 2 (FTP/TFTP
Server).
Settings->Configuration->Upload
Period(30~2592000)s
syslog.ftp.post_mode
1 or 2
It configures whether the log files on the
provisioning server are overwritten or
appended.
1-Append
Settings->Configuration->Post Mode