User guide

Yealink IP Phones Auto Provisioning Guide
120
Parameter
Permitted
Values
Descriptions
Web Setting Path
*.pem, *.crt, *.cer or *.der. It is only applicable
to EAP-TLS, EAP-PEAP/MSCHAPV2,
EAP-TTLS/EAP-MSCHAPV2, EAP-PEAP/GTC,
EAP-TTLS/EAP-GTC and EAP-FAST protocols.
network.802_1x.client_cert_url
URL within 511
characters
It configures the access URL of the device
certificate when the 802.1x authentication
method is configured as EAP-TLS.
The default value is blank.
It takes effect after a reboot.
Note: The format of the certificate must be
*.pem or *.cer.
Network->Advanced->802.1x->Devic
e Certificates
network.802_1x.proxy_eap_logoff.enable
0 or 1
It enables or disables 802.1x-logoff feature for
the PC port.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the 802.1x logoff
message is sent to the authenticator when the
PC is disconnected.
The default value is 0.
It takes effect after a reboot.