Owner's manual

www.yealink.com
SIP-T19P Quick Reference Guide
Basic Call Features
Placing a Call
Redial
Using the handset:
Using the speakerphone:
Using the headset:
1. With the handset on-hook, press .
1. Pick up the handset.
2. Enter the number, and then press the Send soft key.
1. With the headset connected, press to activate the headset mode.
2. Enter the number, and then press the Send soft key.
Note: During a call, you can alternate between headset, hands-free speakerphone and handset modes by
pressing the Headset key or the Speakerphone key or picking up the handset. Headset mode requires a
headset connected.
2. Enter the number, and then press the Send soft key.
Press to enter the Placed Calls list, press or to select the desired entry, and then
press or the Send soft key.
Press twice when the phone is idle to dial out the last dialed number.
Note: You can split the conference call into two individual calls by pressing the Split soft key.
4. Press the Cancel soft key to disconnect all parties.
Call Conference
Always Forward----Incoming calls are forwarded unconditionally.
Busy Forward----Incoming calls are forwarded if the phone is busy.
No Answer Forward----Incoming calls are forwarded if not answered after a period of time.
1. Press the Menu soft key when the phone is idle, and then select Features->Call Forward.
2. Select the desired forward type:
3. Enter the number you want to forward to. For No Answer Forward, press or to select the
ring time to wait before forwarding.
4. Press the Save soft key to accept the change.
1. Press the NewCall soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press the Conf soft key when the second party answers. All parties are now joined in the
conference.
Semi-Attended Transfer
Attended Transfer
Call Forward
Blind Transfer
Call Transfer
You can transfer a call in the following ways:
1. Press or the Tran soft key during a call. The call is placed on hold.
3. Press or the Tran soft key when the second party answers.
To enable call forward:
2. Enter the number you want to transfer to, and then press .
3. Press or the Tran soft key.
2. Enter the number you want to transfer to.
2. Enter the number you want to transfer to, and then press .
1. Press or the Tran soft key during a call. The call is placed on hold.
1. Press or the Tran soft key during a call. The call is placed on hold.
3. Press or the Tran soft key when you hear the ring-back tone.
To resume the call, do one of the following:
Press the Hold soft key during an active call.
If there is more than one call on hold, press or to select the desired call, and then press
the Resume soft key.
If there is only one call on hold, press the Resume soft key.
Ending a Call
Using the handset:
Using the speakerphone:
Using the headset:
Hang up the handset or press the Cancel soft key.
Press or the Cancel soft key.
Press the Cancel soft key.
Answering a Call
Using the handset:
Pick up the handset.
Call Mute and Un-mute
Press to mute the microphone during a call.
Press again to un-mute the call.
To place a call on hold:
Call Hold and Resume
Note: You can ignore an incoming call by pressing the Reject soft key.
Using the speakerphone:
Using the headset:
Press .
Press .