User manual

Enterprise IP Phone Using the Basic Call Functions
- 19 -
Other Settings
Logo Customization
You can upload your own logo which showed in the idle screen.
1) Prepare the desired the logo file which is
--in BMP format
--max pixels: 236*82,
--can only be monochrome with 2 gray scales at most.
2) Run PictureEXDemo.exe, choose Add button-> choose the specific logo
file->choose Convert, and then close the software.
3) A new-built folder named adv with a .dob file will be established.
4) Choose Phone->Function->Logo via the Web interface, press Browse button, and
choose the .dob file just established by the software.
5) Press Upload button to complete the Logo Customization. You will find the desired
logo showed in the idle screen.
Note:
Please contact with your system administrator or service provider for the software with
PictureEXDemo.exe.
Dial Plan
A dial plan establishes the expected number and pattern of digits for a telephone
number. This includes country codes, access codes, area codes and all combinations of
digits dialed.
To set a Dial Plan via the Web interface:
1) Choose Phone->Dial Plan
2) Enter the desired Prefix and XXXXX
3) Press Edit/Add button to save the changes
4) You can also delete a specific one from the dial plan list.
Dial Now
….
Forbidden List
The specific phone numbers can be forbidden to be call out from your IP phone.
1) Choose Phone->Dial Plan->Call Forbidden.
2) Enter the phone number and choose Add button to save the changes, or
Choose the specific one in the list, choose Delete button to delete the record.
3) You can not dial out the number from your IP phone unless it is removed from the
Forbidden List.