User manual

Enterprise IP Phone Overview
- 8 -
These keys are used for various functionalities such as call /Line appearance Button,
speed dial, Intercom, Pickup, Hold, Transfer, etc. If not otherwise stated the adjacent
LED will light when the assigned functionality is turned on.
Dial Pad
Use the DTMF hard keys to enter numbers, letters and special characters. Depending on
the selected input mode you can enter digits, lower / upper case or special characters.
Navigation Keys
Use the navigation keys to navigate in the display menus and confirm and cancel
actions.
Audio Device Control Keys
Use the audio device control keys to perform the following actions depending on your
phone type:
： Adjust the volume of the handset, headset, speaker and ringer;
： Allows for hands-free communication during calls;
： Place and receive calls through an optionally connected headset. The LED will
be on when the phone is in Headset mode;
： Mute audio transmission locally during calls;
Hard Feature Keys
： Allow users to access the voicemail and SMS directly;
： Enable setup of a local 3-way conference;
： Place a call on hold or resume it;
： Transfer current call to third party;
： Dials most recently dialed number;