V32.35 Yealink Network Technology CO., LTD Yealink MVC400 for Microsoft Teams Rooms System Quick Start Guide (V1.
Package Contents ×4 ×2 ×2 UVC 40 VCR20 Remote Control AAA Battery×2 2.5m USB Cable Cable Tie×5 Mounting Bracket and Accessories Power Adapter Silicone Pad×2 UVC40 Quick Start Guide UVC40 Package (Camera) + + 4 4 MCore 1.8M HDMI Cable×2 Bracket Expansion Screw and Machine Screw Velcro×2 Power Adapter ×2 (M3×8 screw) Screwdriver MCore Quick Start Guide MCore Package (Mini-PC) ×2 (M3×8 screw) MTouchⅡ 7.
Wireless Sharing You can use Yealink WPP20 wireless presentation pod for wireless content sharing. WPP20 needs to be purchased separately. Make sure the MTouchⅡ is connected to the MCore. Procedure 1. Connect the WPP20 to the USB port of the MTouchⅡ. 2. Wait for about 3 seconds, the WPP20 LED indicator glows solid green. The WPP20 is paired with the MTouchⅡsuccessfully. 3. Connect the WPP20 to the PC. PC WPP20 Wireless Presentation Pod Enabling/Disabling Tracking Mode Procedure 1.
Upgrading System Software through Windows Update The system software(including the Windows, the UVC40 and the MTouchⅡ) can be automatically upgraded via windows update by default. Otherwise, you can enable automatically windows update or upgrade the devices manually. Enabling Automatically Windows Update Procedure 1. On the display screen, navigate to More->Settings. 2. Enter the administrator password (default: sfb) to access Setup screen. 3. Navigate to Windows Settings. 4.
包装清单 ×4 ×2 ×2 UVC40 VCR20遥控器 7号电池x2 2.5米USB线 束线带x5 UVC40套件(摄像机) 支架配件 (用于安装主机) 电源适配器 + + 4 4 MCore 1.8M HDMI 线×2 电源适配器 挂架版 魔术贴x2 膨胀螺丝和机械螺丝 MCore套件(Mini-PC) 硅胶垫x2 UVC40 快速入门指南 ×2 (M3×8 screw) 螺丝刀 MCore 快速入门指南 ×2 (M3×8 screw) MTouchⅡ 7.5米网线 USB Tpye-C线 (带HDMI转接头) MTouchⅡ 快速入门指南 螺丝刀 MTouchⅡ套件(触控平板) 我们推荐使用由Yealink提供或经Yealink认可的配件和线缆,使用未经认可的第三方配件和线缆可 能会导致性能的下降。 连接MVC400 UVC40 显示器 HDMI USB2.
无线辅流分享内容 你可以使用WPP20无线传屏助手进行无线辅流分享内容。 WPP20需要单独购买。 分享内容前,确保MTouchⅡ已正确连接在MCore上。 过程 1. 将WPP20连接到MTouchⅡ的USB口。 2. 约3秒后,WPP20指示灯显示绿色常亮。 WPP20与MTouchⅡ配对成功。 PC 3. 将WPP20连接到电脑上。 开启/关闭摄像机追踪模式 过程 1. 按 进入摄像机控制界面。 。 2. 选择 3. 在智能取景区域选择自动框人像或语音追踪。 控制摄像头位置 过程 1. 按 2. 按 进入摄像机控制界面。 或 调整摄像机的焦距。 3. 按方向键调整摄像机角度。 摄像机开启智能取景功能后,无法控制摄像头。 恢复摄像头到主位置 过程 1. 按 进入摄像机控制界面。 2.
通过Windows更新系统 系统软件(包括Windows, UVC40和 MTouchⅡ)默认情况下可以通过windows 自动更新升 级。 如果设备软件没有自动升级,你可以启用自动windows自动更新或手动升级设备。 开启Windows自动更新 过程 1. 在显示屏上, 按更多->设置。 2. 输入管理员密码(默认: sfb)进入设置界面。 3. 按 Windows设置。 4. 从左下角选择Administrator帐户,并输入管理员帐户密码(默认: sfb)。 5. 按开始菜单,选择设置->更新和安全->Windows更新, 再按高级选项。 6. 开启自动下载更新,即使通过按流量计费的数据连续也是如此(可能会收费)。 手动更新升级设备 过程 1. 在显示屏上, 按更多->设置。 2. 输入管理员密码(默认: sfb)进入设置界面。 3. 按 Windows设置。 4. 从左下角选择Administrator帐户,并输入管理员帐户密码(默认: sfb)。 5.
Regulatory Notices Operating Ambient Temperatures Operating temperature: +32 to 104°F (0 to 40°C) Relative humidity: 5% to 90%, noncondensing Storage temperature: -22 to +160°F (-30 to +70°C) Warranty Our product warranty is limited only to the unit itself, when used normally in accordance with the operating instructions and the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim from a third party.