Specifications

Customizing Your Phone
55
To delete one or more replace rules via web user interface:
1. Click on Phone->Dial Plan->Replace Rule>>.
2. Select the one or more replace rules by checking the check box(es).
3. Click Delete to delete the replace rule(s).
You can configure one or more dial-now rules on your phone. When the dialed out
number matches the dial-now string, the number will be dialed out automatically. For
example, a dial-now rule is configured as "2xx", then entering any three-digit string
begins with 2 will be dialed out automatically on the phone.
To add a dial-now rule via web user interface:
1. Click on Phone->Dial Plan->Dial-now>>.
2. Enter the desired value (e.g. 1234) in the Dial-now Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Add to add the dial-now rule.
When you enter the number “1234” using the keypad, the phone will dial out “1234”
automatically without pressing any key.
Note
Delay Time for Dial-now Rule
You can configure the interval for dial-now rules. That is, you can configure your phone
to dial out the phone number automatically, which matches a dial-now rule, after the
specified delay time.
To configure the timeout for dial-now rule via web user interface:
1. Click on Phone->Features->General Information>>.
2. Enter the time within 0-14 (in seconds) in the Time Out for Dial-now Rule field.
3. Click Confirm to accept the change.
Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate
geographical areas in a country. This feature is necessary only when dialing the number
outside the code area. For example, area code is configured as "Code: 011, Minimum
Length: 4, Maximum Length: 11", then when you dial out the number "56789", the phone
will add the area code and dial out the number "01156789".
You can also edit or delete the dial-now rule, refer to Replace Rule on page 54 for more
information.