User Guide

| Pair the Headset with Base | 7
Power off the Base
Procedure
1. For WH62/WH66/WH67 base, unplug the power adapter.
2. For WH63 base, unplug the power adapter and disconnect from the USB device.
Power off the Headset
Procedure
Undock the headset and hold the Call Control button for 3 seconds.
You hear a "power off" tone indicating headset status.
Note: Power off the headset will only disconnect the connection between the base and the
headset, but will not delete the pairing information between the base and the headset.
Pair the Headset with Base
Before you begin
The base has been connected to a power supply.
Procedure
Dock the headset in a base.
Results
The headset is successfully paired with the base. The LED on the headset glows green for 5 seconds, and
then indicates the charging status.
Note: You can pair up to four headsets to one base. After the headset is paired, it will keep paired
even you undock the headset.
Related tasks
Add Headset(s) During a Call
Add Headset(s) When the Base is Idle
How to Connect WH62/WH63
You can connect one or both of the desk phone and the PC.
• WH62/WH63 Port Overview
• Connect to PC via USB Cable
• Connect to Desk Phone via USB Cable