Specifications

Call Features
55
- Press the Directory soft key, and select the desired contact.
Press the Call soft key.
If both the office number and the mobile number of the contact are stored,
select the desired number and press or the OK soft key to dial out.
4. When the second party answers the call, you can consult with him or her before
adding to the conference.
5. Press the Conf. soft key again to join all parties in the conference.
To join two calls in a conference:
1. Place two calls on the handset.
2. Select the desired call and make sure the call is active.
3. Press the Options soft key, and select Conference.
Two calls are joined in the conference.
To drop the conference call, press or the End soft key.
You can use anonymous call feature to block the identity and phone number from
showing up to the called party when you call someone. For example, you want to call to
consult some service, but you do not want to be harassed. You can configure the
anonymous call feature on a per-line basis.
Note
To enable the anonymous call feature for a specific line:
1. Press to enter the main menu.
2. Select ->Anonymous Call.
The LCD screen displays the outgoing lines currently assigned to the handset. The
default outgoing line is highlighted and followed by a left arrow.
3. Press or to highlight the desired line, and press the OK soft key.
4. Press or to select Enabled from the Status field.
5. Press the OK soft key to accept the change.
To place an anonymous call:
1. Using the specific line on the handset to place a call.
The LCD screen of the phone receiving this call prompts an incoming call from
anonymity.
The anonymous call feature is not available on all servers. Contact your system
administrator for more information.