Specifications

Call Features
53
To enable the call forward feature for a specific line:
1. Press to enter the main menu.
2. Select ->Call Forward.
The LCD screen displays the incoming lines currently assigned to the handset.
3. Press or to highlight the desired line, and press the OK soft key.
4. Press or to highlight the desired forwarding type, and press the OK soft
key.
5. Press or to select Enabled from the Status field.
6. Enter the destination number you want to forward incoming calls to in the Target
field.
7. Press or to select the desired ring time to wait before forwarding from the After
Ring Time field (only available for No Answer Forward).
8. Press the Save soft key to accept the change.
The icon on the idle screen indicates the call forward feature is enabled.
If Always Forward is selected, there is no prompt on the LCD screen when the line
receives an incoming call. The incoming call is logged in the Accepted Calls list.
Note
You can transfer a call to another party in one of the following ways:
 Blind Transfer: Transfer a call directly to another party without consulting.
 Semi-Attended Transfer: Transfer a call when receiving the ring-back.
 Attended Transfer: Transfer a call with prior consulting.
To perform a blind transfer:
1. Press the Options soft key during a call, and select Blind Transfer.
2. Do one of the following:
- Enter the number or select the handset you want to transfer the call to.
Press , or the Transfer soft key.
- Press the Directory soft key, and select the desired contact.
Press the Call soft key.
If both the office number and the mobile number of the contact are stored,
select the desired number and press or the OK soft key.
The call is connected to the number or handset you specified, and the LCD screen
prompts the message “Call Transferred”.
Call forward feature may be overridden by the server settings. For more information,
contact your system administrator.