Specifications

Phone Settings
45
Contact your system administrator for the username and password used to connect the
RPS server.
To trigger the auto provisioning:
1. Press to enter the main menu.
2. Select ->System Settings->Auto Provision.
3. Enter the system PIN (default: 0000) and press the Done soft key.
4. Enter the valid value in the Username field and press the OK soft key.
5. Enter the valid value in the Password field and press the OK soft key.
The LCD screen prompts the warning “Update now?”.
6. Press the Yes soft key to perform an update or press the No soft key to cancel.
Eco mode+ turns off the transmission power and the radio waves emitted are
virtually zero when the phone is in the standby mode. If the eco mode+ is
enabled, and there is no signal interaction between the handset and the base
station, the color of the signal strength indicator on the idle screen displays in
green. When a call comes in or a connection occurs, the phone exits the eco
mode+ automatically, and the signal strength indicator on the idle screen
changes from green to white.
To configure the eco mode+:
1. Press to enter the main menu.
2. Select ->System Settings->Eco Mode+.
3. Press the Change soft key to check or uncheck the Eco Mode+ checkbox.
4. Enter the system PIN (default: 0000) and press the Done soft key.
The LCD screen prompts the warning “Are you sure you want to reboot the base
station?”.
5. Press the Yes soft key to reboot the base station.
The base station reboots to make the configuration take effect. The configuration
applies to all the handsets registered to the base station.
Eco mode greatly reduces the transmission power and signal output when the
phone is in the talk mode. The attenuation range is 20m. When the distance
between the base station and the handset is over 20m, the eco mode is
disabled automatically.