Specifications

User Guide W52P IP DECT Phone
40
Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate
geographical areas in a country. This feature is necessary only when dialing the number
outside the code area. For example, area code is configured as “Code: 011, Minimum
Length: 4, Maximum Length: 11”, then when you dial out the number “56789”, which has
digits between 4 and 11, the phone will add the area code before the number and dial
out (01156789).
To configure the area code via web user interface:
1. Click on Phone->Dial Plan->Area Code.
2. Enter the desired values in the Code, Minimum Length (1-15) and Maximum Length
(1-15) fields.
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Confirm to accept the change.
Note
You can block the dialing of specific numbers. When you dial a block out number on the
handset, the dialing will fail and the LCD screen will prompt “Num Block”.
To add a block out number via web user interface:
1. Click on Phone->Dial Plan->Block Out.
2. Enter the desired value in the BlockOut Number field.
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Confirm to add the block out number.
Public telephone networks in countries around the world have a single emergency
telephone number (emergency services number), that allows a caller to contact local
emergency services for assistance when required. The emergency telephone number
may differ from country to country. It is typically a three-digit number so that it can be
easily remembered and dialed quickly. Some countries have different emergency
numbers for different emergency services. You can specify the emergency numbers for
contacting the emergency services in an emergency situation.
Note
The default values of minimum and maximum length are 1 and 15 respectively.
Contact your local phone service provider for available emergency numbers in your
area.