Specifications

Basic Operations
17
3. Enter the system PIN (default: 0000).
4. Press the Done soft key.
5. Press or to select Static from the IP Address Type field.
6. Enter the valid values in the IP Address, Subnet Mask, Default Gateway, Primary
DNS and Secondary DNS fields.
7. Press the Save soft key to accept the change.
If you are using an xDSL modem, you can connect your base station to the Internet by
configuring the Internet port on the base station as a PPPoE port. The PPPoE port
performs a PPP negotiation to obtain the IP address. Contact your system administrator
for the PPPoE username and password.
To configure PPPoE:
1. Press to enter the main menu.
2. Select ->System Settings->Network.
3. Enter the system PIN (default: 0000).
4. Press the Done soft key.
5. Press or to select PPPoE from the IP Address Type field.
6. Enter the valid values in the PPPoE User and PPPoE Password fields.
7. Press the Save soft key to accept the change.
Note
You can view the system status on your handset. Available information of the system
status includes:
 General information—including the IP address, MAC address, firmware version and
RFPI code of the base station.
 Network status—including the IP type, subnet mask, gateway address, primary DNS
address and secondary DNS address.
 Handset status—including the device model, hardware version, firmware version,
product ID, IPUI code and area of the handset.
To check the general information:
1. Press to enter the main menu.
2. Select ->System Status.
The LCD screen displays the general information and the More… option.
Using the wrong network parameters may result in inaccessibility of your phone and may
also have an impact on your network performance. For more information about these
parameters, contact your system administrator.