Specifications

Administrator’s Guide for CP860 IP conference phones
330
</root_super_search>
You can add contacts one by one on the IP phone directly. You can also add multiple
contacts at a time and/or share contacts between IP phones using the local contact
template file (Yealink-supplied template file is named as contact.xml). After setup,
place the local contact file to the provisioning server, and specify the access URL of the
file in the configuration files.
When editing a local contact file, learn the following:
 <root_contact> indicates the start of a contact list and </root_contact> indicates
the end of a contact list.
 <root_group> indicates the start of a group list and </root_group> indicates the
end of a group list.
 When specifying a ring tone for a contact or a group, the format of the value must
be Auto (the first registered line), Resource:RingN.wav (the default system ring
tone ranges from 1 to 5) or Custom:Name.wav (the custom ring tone).
Procedure
Use the following procedures to customize a local contact template file.
To customize a local contact file:
1. Open the template file using an ASCII editor.
2. For each group that you want to add, add the following string to the file. Each
starts on a separate line:
<group display_name=”” ring=””/>
Where:
display_name=”” specifies the name of the group.
ring=”” specifies the desired ring tone for this group.
3. For each contact that you want to add, add the following string to the file. Each
starts on a separate line:
<contact display_name="" office_number="" mobile_number="" other_number=""
ring="" group_id_name="" />
Where:
display_name=”” specifies the name of the contact (This value cannot be blank or
duplicated).
office_number =”” specifies the office number of the contact.
mobile_number=”” specifies the mobile number of the contact.
other_number=”” specifies the other number of the contact.