Specifications

Configuring Advanced Features
277
d) If you select EAP-TTLS/EAP-MSCHAPv2:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.
3) In the CA Certificates field, click Browse to locate the desired certificate
(*.pem,*.crt, *.cer or *.der) from your local system.
4) Click Upload to upload the certificate.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after reboot.
4. Click OK to reboot the phone.
To configure the 802.1X via phone user interface after:
1. Press Menu->Settings->Advanced Settings (Default password: admin)
->Network->802.1x Settings.
2. Press the or soft key to select the desired value from the 802.1x Mode field.
a) If you select EAP-MD5:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.
b) If you select EAP-TLS:
1) Enter the user name for authentication in the Identity field.
2) Leave the MD5 Password field blank.
c) If you select PEAP-MSCHAPv2:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.