Specifications

Configuring Advanced Features
271
Parameters
Permitted Values
Default
If it is set to “0.0.0.0”, the IP phone can accept and handle GET requests from any IP
address.
If it is left blank, the IP phone cannot receive or handle any GET request.
Example:
network.snmp.trust_ip = 192.168.1.50 as.manager.com
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->SNMP->Trusted Address
Phone User Interface:
None
To configure SNMP via web user interface:
1. Click on Network->Advanced.
2. In the SNMP block, select the desired value from the pull-down list of Active.
3. Enter the desired port in the Port field.
4. Enter IP address(es) (IPv4 or IPv6) or domain name of the SNMP server in the
Trusted Address field.
Multiple addresses are separated by space.