Specifications

Administrator’s Guide for CP860 IP conference phones
270
Local
Web User Interface
Configure SNMP.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network-adv&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.snmp.enable
0 or 1
0
Description:
Enables or disables SNMP feature on the IP phone.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->SNMP->Active
Phone User Interface:
None
network.snmp.port
1 to 65535
161
Description:
Specifies the port used for SNMP communication.
Example:
network.snmp.port = 1008
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->SNMP->Port (1~65535)
Phone User Interface:
None
network.snmp.trust_ip
At most 255 characters
Blank
Description:
Specifies the SNMP server addresses from which GET requests will be accepted.
You can specify one or more addresses. Multiple addresses are separated by
space.