Specifications

Configuring Advanced Features
231
Variable Value
Phone Action
BTrans=xxx
Perform a blind transfer to xxx.
CALLEND
End a call.
Note
For security reasons, IP phones do not receive and handle HTTP/HTTPS GET requests by
default. You need to specify the trusted IP address for action URI. When the IP phone
receives a GET request from the specified IP address for the first time, the LCD screen
prompts the message “Allow Remote Control?”. You can specify one or more trusted IP
addresses on the IP phone, or configure the IP phone to receive and handle the URI
from any IP address.
Procedure
Specify the trusted IP address for Action URI using the configuration files or locally.
Configuration File
y000000000037.cfg
Specify the trusted IP
address(es) for sending the
Action URI to the IP phone.
Parameter:
features.action_uri_limit_ip
Local
Web User Interface
Specify the trusted IP
address(es) for sending the
Action URI to the IP phone.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-remotecontrl&q
=load
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
features.action_uri_limit_ip
IP address or any
Blank
Description:
Configures the address(es) from which Action URI will be accepted.
For discontinuous IP addresses, multiple IP addresses are separated by commas.
For continuous IP addresses, the format likes *.*.*.* and the “*” stands for the values
The variable value is not applicable to all events. For example, the variable value
“MUTE” is only applicable when the IP phone is during a call.
When authentication is required, you must enter
“p=login&q=login&username=xxx&pwd=yyy&jumpto=URI&” before the variable
“key”. xxx refers to the login user name, and yyy refers to the login password.