Manualshelf

User Guide

ManualsBrandsYealink ManualsOffice Electronics5 Pack of Yealink SIP-T48G Gbit VoIP Phone Ultra-Elegant Touchscreen
51525354555657585960
Getting Started
45
To configure the IP mode via phone user interface:
1. Tap ->Advanced (default password: admin) ->Network->WAN Port.
2. Tap the desired value (IPv4, IPv6 or IPv4 & IPv6) from the pull-down list of IP Mode.
3. Tap to accept the change or tap to cancel.
You can configure a static IPv4 address for the Skype for Business phone. Before configuring it,
make sure that the IP mode is configured as IPv4 or IPv4 & IPv6.
To configure a static IPv4 address via phone user interface:
1. Tap ->Advanced (default password: admin) ->Network->WAN Port->IPv4.
2. Tap Static IP from the pull-down list of Type.
3. Enter the desired value in the IP Address, Subnet Mask, Gateway, Pri.DNS and Sec.DNS
field respectively.
4. Tap to accept the change or tap to cancel.
You can configure a static IPv6 address for the Skype for Business phone. Before configuring it,
make sure that the IP mode is configured as IPv6 or IPv4 & IPv6.