User Guide

Better Together over Ethernet
213
2. Select Enabled from the pull-down list of BToE.
3. Select the desired value from the pull down-list of the BToE Pairing mode.
The default value is Auto.
4. Tap to accept the change.
Ensure that the Yealink BToE Connector application is running on your PC. To pair your phone
with your Skype for Business client, do one of the following on your PC:
a) Connect an Ethernet cable from your computer to the PC port on your phone
(network of the PC will be provided by the PC port of the phone).
1. As the checkbox of Wired is checked by default, the IP address of your phone is
automatically filled in the Phone IP field.
2. Click Pair.
- If BToE Pairing Mode is Auto, your phone will pair with Skype for Business
client directly.