User's Manual

UserGuideW52PIPDECTPhone
48

Toun‐muteacall:
1. Press again.
TheicondisappearsfromtheLCDscreen.
Call Hold/Resume
Youcanplaceanactivecallonhold.Atanytime,atmostoneactivecallcanbeinprogressonyour
handset.Anothercallcanbeansweredandmadewhileplacingtheoriginalcallonhold.
Toplaceacallonhold:
1. PresstheOptionssoftkeyduringa
call,andselectHold.
ThecallisplacedonholdandtheicondisplaysontheLCDscreen.
Toresumeaholdcall: 
Dooneofthefollowing:
- PresstheResumesoftkey.
- Press.
- Press.
TwoCallsonHold:
Iftwocallsareplacedonholdonthehandset,presstheResumesoftkeytoresumethecurrentcall.
Press,  ortheSwapsoftkeyto
swapbetweenthetwocalls.
Note
Call Waiting
Youcanenableordisablethecallwaitingfeatureonthehandset.Ifthecallwaitingfeatureisenabled,
thehandsetwillnoti fyyou ofanewincomingcallduringacall,andpresenttheincomingcall
informationvisuallyontheLCDscreen.Youcanalsoenablethehandsettoplay
awarningtonewhen
receivinganewincomingcallduringacall.Ifthecallwaitingfeatureisdisabled,thenewincomingcall
willbeautomaticallyrejectedbythehandset.
Toconfigurethecallwaitingfeature:
1. Presstoenterthemainmenu.
2. Select ‐>CallWaiting.
3.
Press ortoselectthedesiredvaluefromtheStatusfield.
Whenthecallonthehandsetisonhold,placingthehandsetinthechargercradlewillnotendthecall.