User's Manual

PhoneSett ings
41
2. Select‐>SystemSettings‐>HandsetReset.
TheLCDscreenpromptsthewarning“Resethandsettodefault?”.
3. PresstheYessoftkeytoresetthehandsetortheNosoftkeytocancel.
Base Reset
Youcanresetthebasestationtofactorysettings.Thiswillclearallindividualsettingsofthebase
station,entriesofthedirectoryandactiveSIPregistrations.Allregisteredhandsetsarede‐registered.
Youneedtore‐registeryourhandsettouse.Werecommendthatyouaskyoursystemadministrator
for
advicebeforeresettingyourbasestation.
Toresetthehandset:
1. Presstoenterthemainmenu.
2. Select‐>SystemSettings‐>BaseReset.
3. EnterthesystemPIN(default:0000).
4. PresstheDonesoftkey.
Thebasestationisresettofactorysettingssuccessfully.ThepowerindicatorLED
onthebase
stationslowflasheswhenthebasestationisduringtheresettingprocess.
Auto Provision
YoucantriggertheautoprovisioningprocessusingtheVoIPwizard.Afteryouentertheusernameand
passwordinthewizardandconfirmtoperformanupdate,thebasestationtriestoconnecttotheRPS
server.IfthebasestationsuccessfullyconnectstotheRPSserver,theRPSserverresponds
thebase
stationwiththeURLfordownloadingtheconfigurationfiles.Thenthebasestationtriestoperform
theautoprovisioningprocess.Contactyoursystemadministratorformoreinformationonthe
usernameandpasswordforconnectingtotheRPSserver.