User's Manual

Gett i n g Started
5
Setting up the W52P/W52H Handset
Toinsertbatteriesintothehandset:
1. Openthebatterycover.
2. Insertthebatteriesinthecorrectpolarity.
3. Closethebatterycover.

Note 
BatteryInformation
Technology:NickelMetalHydride(NiMH)
Size:AAA
Vol tage:1.2V
Capacity:800mAh
Westronglyrecommendyouusethebatteriescomplyingwiththeaboveparame ters.Becausethe
compliantonescanguaranteethespecifiedoperatingtime,fullfunctionalityandlongservicelife.
Theoperatingtimeofyourhandsetdependsonthecapacityandageofthebatteriesandtheway
theyareused.
Werecommendyouuseonlythebatteriesthatcamewiththehandsetorreplacementbatteries
approvedbyYeal inktechnology:
 SanyoNiMH800
 GP850mAh
 YuasaTechnologiesAAA800
Setting up the Charger Cradle
1. ConnecttheDCplugonthepoweradaptertotheDC5Vportonthechargercradle.
2. Connecttheotherendofthepoweradapterintoanelectricalpoweroutlet.
Donotshort‐circuitthebatteries,asshort‐circuitingtheterminalsmaydamagethebatteriesorthe
handset.
Donotusedamagedbatteries,asusingdamagedbatteriesmaycauseanexplosion.