Video Conferencing Wireless Microphone Quick Start Guide(V1.2) www.yealink.
Packaging Contents The following items are included in your package. If you find anything missing, contact your system administrator. Power Adapter Dongle VCM60 Wireless Micpod USB Cable Quick Start Guide The VCM60 Component Introduction 4 1 5 2 3 1 Battery Indicator 4 Charging Interface 2 Built-in Microphone 5 Switch 3 Mute Button Turning On or Off the VCM60 To start the VCM60, turn on the switch on the bottom of the VCM60.
To connect the VCM60 to the VC110 video conferencing endpoint, do the following: 1. Connect the dongle to one of the USB ports on the VC110 on-in-one unit. The （unregistered) icon appears on the status bar of the display device. 2. Turn on the VCM60. The VCM60 registers with the dongle automatically. If successful, the (unregistered) icon on the status bar of display device will change to (registered). And the display device prompts the battery capacity.
Mute indicator LED on the VCM60 Wireless Micpod: LED Status Fast flashing green Description The VCM60 is searching the dongle. The VCM60 registers with the dongle, and then enters Green and in breathing the online standby status. state The VCM60 is unmuted in the online standby status. Red and in breathing state Solid green The VCM60 is muted in the online standby status. The VC110 is placing a call. The VC110 is unmuted during a call. Solid red The VC110 is muted during a call.
Do the following to ensure optimal voice quality: The VCM60 video conferencing wireless micpod should be less than 30 meters distant from the dongle, and isn’t disturbed by obstacles. Place the VCM60 on a stable surface and keep it away from obstacles so that it can effectively pick up sounds. Speak into the VCM60 to ensure that all participants can hear you during a conference.
To charge using a power adapter To charge using a computer Note: The VCM60 can work normally during charging and needs about 2.5 hours to be full of electricity. Muting or Unmuting the VCM60 When VCM60 works as an audio input device of the VC110 video conferencing endpoint, you can tap the mute button on the top of the VCM60 to mute or unmute the VCM60. Frequently Asked Questions 1.
3. How to mute the VCM60 when it is in online standby status or during a call? In online standby status, tap the mute button on the VCM60 to mute it, the mute indicator is red and is in breathing state. During a call, tap the mute button on the VCM60 to mute it, the mute indicator illuminates solid red and the mute icon appears on the local video image. 4. How to log into the web user interface of VC110? 1) Enter the IP address of the VC110 video conferencing endpoint (e.g., http://192. 168.0.10 or 192.168.
About us Founded in 2001, Yealink, a leading provider of VoIP Phone and IP communication solutions, has been focusing on VoIP products characterized by reliable quality, easy deployment and affordable price for more than a decade. Today, customers from over 140 countries rely on Yealink as the backbone of global collaboration to extend the value of network communications.
FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
