User's Manual

(3) The icons display the battery condition
a. flat to full
b. flashes:battery almost flat
c.flashes: battery charging
(4) The icons display in contacts
a. Online b. Offline c. SkypeOut
2.10Automatic select RF channel
This function is effective to improve the quality of handset’s
voice when the voice is not so good. It will automiatically select
RF channel for communications.
(1) Right click the icon
on the taskbar and select Advance
(2)The window shown as below:
(3)
Select Auto selection RF Channel to enable this function.
(4) Click the icon “OK” and the function is active.
(5) When the voice isn’t so good, the the handset and the base
station can automatically select a new channel to improve
the voice.
2.11 Mannual select RF channel
If you know one RF channel is not used bye other RF
equipment, you can use this function to give a fixed channel for
W1D.
(1)Right click the icon
on the taskbar and select Advance
(2)The window is shown as below:
12
13