User's Manual

Basic Call Features
1. Pick up the handset.
2. Enter the number, and then press the Send soft key.
Using the headset:
Using the handset:
Pick up the handset.
Using the speakerphone:
Press
.
Press
.
Controlling Video During a Call
Tap .
Ending a Video/Voice Call
Using the handset:
Hang up the handset or press the EndCall soft key.
Using the speakerphone:
Using the headset:
Press or tap the EndCall soft key.
Tap the EndCall soft key.
Redial
Press to enter the Placed Calls list, and then tap the desired entry.
Press twice when the phone is idle to dial out the last dialed number.
Call Mute and Un-mute
Press to mute the microphone during a call.
Press again to un-mute the call.
If there is more than one call on hold, tap the call you want to resume,and press or tap the Resume soft key.
Call Hold and Resume
To place a call on hold:
To resume the call, do one of the following:
If there is only one call on hold, press or tap the Resume soft key.
Press or tap the Hold soft key during an active call.
Semi-Attended Transfer
Blind Transfer
Call Transfer
You can transfer a call in the following ways:
1. Press or tap the Transfer soft key during a call. The call is placed on hold.
1. Press or tap the Transfer soft key during a call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press .
3. Press or tap the Transfer soft key when you hear the ring-back tone.
3. Press or tap the Transfer soft key.
2. Enter the number you want to transfer to.
Swipe down from the top of the screen to enter the control center, tap Video to turn on/off the camera.
6
Switch the Video View
Placing a Video/Voice Call
Using the handset:
1. With the handset on-hook, press .
2. Enter the number, and then press the Send soft key.
Using the speakerphone:
Answering a Video/Voice Call
2. Enter the number, and then press the Send soft key.
1. With the headset connected, press to activate the headset mode.
Using the headset:
Turning on/off video during a call
Press .