User's Manual

User Guide for the SIP-T48G IP Phone
84
For more information on the valid value of the Account field, refer to Replace Rule
on page 80.
4. Click Confirm to accept the change.
Note
$NQEM1WV
You can block some specific numbers (at most 10) from being dialed on your phone.
When you dial a block out number on your phone, the dialing will fail and the LCD
screen will prompt "Forbidden Number".
To add a block out number via web user interface:
1. Click on Settings->Dial Plan->Block Out.
2. Enter the desired value in the BlockOut Number field.
3. Enter the desired line ID in the Account field or leave it blank.
The default values of minimum and maximum length are 1 and 15 respectively.
Area code is configurable via web user interface only.