User's Manual
User Guide for the SIP-T48G IP Phone
82
&KCNPQY
You can configure one or more dial-now rules (at most 100) on your phone. When the
dialed number matches the dial-now string, the number will be dialed out
automatically. For example, a dial-now rule is configured as "2xx", then any entered
three-digit string beginning with 2 will be dialed out automatically on the phone.
To add a dial-now rule via web user interface:
1. Click on Settings->Dial Plan->Dial-now.
2. Enter the desired value (e.g., 1234) in the Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
For more information on the valid value of the Account field, refer to Replace Rule
on page 80.
4. Click Add to add the dial-now rule.
When you enter the number “1234” using the keypad, the phone will dial out “1234”
automatically without pressing any key.
Note
Delay Time for Dial-Now Rule
You can configure the delay time for dial-now rules. That is, you can configure your
phone to dial out the phone number automatically, which matches a dial-now rule,
after the specified delay time.
To configure the delay time for dial-now rule via web user interface:
1. Click on Features->General Information.
You can also edit or delete the dial-now rule, refer to Replace Ruleon page 73for more
information.
Dial-now rule is configurable via web user interface only.