User's Manual
User Guide for the SIP-T48G IP Phone
32
2. Enter the old password in the Current Password field.
3. Enter the new password in the New Password field.
4. Enter the new password again in the Confirm Password field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Administrator password is configurable via web user interface at the path
Security->Password.
-G[CU5GPF
You can set the "#" or "*" to perform as a send key while dialing.
To configure key as send via phone user interface:
1. Press Menu->Call Features->Others->General.
2. Press or , or the Switch soft key to select # or * from the Key as Send field, or
select Disabled to disable this feature.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Key as send is configurable via web user interface at the path Features->General
Information.
-G[RCF.QEM
You can lock the keypad of your phone temporarily when you are not using it. This