User's Manual

Basic Call Features
115
To perform an attended transfer:
1. Press or the Transfer soft key during a call.
2. Do one of the following:
 Enter the number you want to transfer the call to.
- Press the Directory soft key, and then select Local Directory. Select the desired group
and search for the contact (Directory should be configured in advance. Refer to
Directory on page 39 for more information).
- Press the Directory soft key, and then select Local Calllog. Select the desired list and
press or to select the entry (Directory should be configured in advance.
Refer to Directory on page 39 for more information).
 Press the Directory soft key, and then select Remote Phone Book. Select the desired
group and search for the contact (Directory should be configured in advance.
Refer to Directory on page 39 and Remote PhoneBook on page 55 for more
information).
3. Press or to dial out.
4. After the party answers the call, press or the Transfer soft key to complete the
transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft
key.
%CNN9CKVKPI
You can enable or disable call waiting on the phone. If call waiting is enabled, you can
receive another call when there is an active call on the phone. Otherwise, another
incoming call is automatically rejected by the phone with a busy message when there
is an active call on the phone. You can also enable or disable the phone to play a
warning tone when receiving another call.
To configure call waiting via phone user interface:
1. Press Menu->Call Features->Call Waiting.
2. Press or , or the Switch soft key to select Enabled from the Call Waiting
field.
3. Press or , or the Switch soft key to select Enabled from the Play Tone field.