User's Manual
Basic Call Features
101
The line key LED flashes green. The phone will beep softly every 30 seconds to remind
you that you still have a call on hold.
To resume a held call:
1. Press or the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
- Press or to switch between the calls, and then press the Resume soft key to
retrieve the desired call.
- Press the corresponding line key to retrieve the call.
If more than two calls are on hold, a numbered prompt appears on the LCD screen, for
example "2/4", indicating that this is the second call out of four calls.
&Q0QV&KUVWTD&0&
You can use DND to reject incoming calls automatically on the phone. Callers will
receive a busy message.
You can enable/disable DND for the phone system, or you can customize DND for
each or all accounts. Two DND modes:
z Phone (default): DND is effective for the phone system.
z Custom: DND can be configured for each or all accounts.
You can receive incoming calls from authorized numbers when DND is enabled.
To configure the DND mode via web user interface:
1. Click on Features->Forward & DND.