User's Manual

User Guide SIP-T42G IP Phone
50
To specify emergency numbers via web user interface:
1. Click on Features->Phone Lock.
2. Enter the emergency services number in the Emergency field. For multiple numbers,
enter a "," between each emergency number.
The default emergency numbers are 120, 911 and 110.
3. Click Confirm to accept the change.
Live Dialpad
You can enable the live dialpad feature on the SIP-T42G IP phone, which enables the IP
phone to automatically dial out the phone number without pressing any other key. You
can also configure a period of time before automatically dialing out the phone
number.
To enable the live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time (1~14) (seconds) field.
4. Click Confirm to accept the change.
Note
Hotline
You can dial a hotline number immediately once you lift the handset, press the
speakerphone key or press a line key. You can also configure a period of delay time to
dial out the hotline number, the phone will dial out the hotline number automatically
after the specified delay time.
To configure the hotline number via phone user interface:
1. Press Menu->Call Feature->Others->Hotline.
2. Enter the desired number in the Number field.
3. Enter the delay time in the Hotline Delay0-10(s) field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also configure hotline via web user interface at the path Features->General
Information.
The default delay time of live dialpad feature is 4s.
You can configure live dialpad via web user interface only.