User's Manual

User Guide SIP-T42G IP Phone
24
To select a ring tone for the phone via web user interface:
1. Click on Settings->Preference.
2. Select the desired ring tone from the pull-down list of Ring Tone.
3. Click Confirm to accept the change.
To select a ring tone for the account via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Basic
4. Select the desired ring tone from the pull-down list of Ring Tone.
If Common is selected, this account will use the ring tone selected for the phone at
Settings->Preference. Refer to the above instruction.
5. Click Confirm to accept the change.
You can also upload custom ring tones for your phone, contact your system
administrator for more information.
Note
Contact Management
This section provides the operating instructions for managing contacts. The topics
include:
z Favorites
z Local Directory
z Blacklist
z Remote Phonebook
Favorites
Favorites provide easy access to the lists you use frequently. The lists may contain Local
Directory, History, Remote Phone Book and LDAP.
To configure the favorites via web user interface:
1. Click on Contacts->Setting.
The ring tone for an incoming call on the phone may be different. For example, when
the phone receives an incoming call from a contact stored in the local directory, it will
play the ring tone assigned to the contact in the contact directory (refer to Adding
Contacts
in the Contact Management section). Otherwise, the phone will play the ring
tone assigned to the account. If both the contact ring tone and the account ring tone
are not assigned, then the phone will play the ring tone assigned for the phone.