Enterprise IP Phone SIP-T23 & T23P & T23G Quick Start Guide (V80.1) www.yealink.com Applies to firmware version 44.80.0.1 or later.
Packaging Contents The following items are included in your package. If you find anying missing, contact your system administrator. IP Phone Handset Handset Cord Ethernet Cable Quick Start Guide Power Adapter （Optional） Stand Note: The models displayed on the phone differ from each other. The packaging content "IP Phone" listed above takes a SIP-T23G IP phone as an example. Assembling the Phone 1.Attach the stand,as shown below: A Desk Mount Method 2 1 B Wall Mount Method 2.
.Connect the network and power, as shown below : You have two option for network and power connections. Your system administrator will advise you on which one to use. Power Adapter (DC 5V) PC Connection (Optional) A AC Power Option B PoE ( Power over Ethernet ) Option IEEE 802.3af compliant PoE Hub/Switch PC Connection (Optional) Note: PoE is applicable to the SIP-T23P & T23G IP phones. If inline power (PoE) is provided, you do not need to connect the power adapter.
Configuring Your Phone Configuring Your Phone Configuring via web user interface Accessing the web user interface: 1. Press the OK key when the phone is idle to obtain the IP address of the phone. 2. Open the web browser of your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or "192.168.0.10"), and then press the Enter key. 3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm.
Basic Call Features Placing a Call Using the handset: 1. Pick up the handset. 2. Enter the number, and then press the Send soft key. Using the speakerphone: 1. With the handset on-hook, press . 2. Enter the number, and then press the Send soft key. Using the headset: 1. With the headset connected, press to activate the headset mode. 2. Enter the number, and then press the Send soft key.
Call Transfer You can transfer a call in the following ways: Blind Transfer 1. Press or the Tran soft key during a call. The call is placed on hold. 2. Enter the number you want to transfer to. 3. Press or the Tran soft key. Semi-Attended Transfer 1. Press or the Tran soft key during a call. The call is placed on hold. 2. Enter the number you want to transfer to, and then press 3. Press . or the Tran soft key when you hear the ring-back tone. Attended Transfer 1.
