User Guide

Basic Call Features

To place a call using the headset:

With the optional headset connected, press

Enter the desired number using the keypad.

to activate the headset mode.

3. Press , , or the Send soft key.

Note

To permanently enable your headset, refer to Headset Prior on page 47.

To place multiple calls:

You can have more than one call on your SIP-T19P IP phone. To place a new call during

an active call:

Press the Hold soft key to place the original call on hold.

Press the NewCall soft key.

Enter the desired number using the keypad.

4. Press , , or the Send soft key.

You can press

to switch between the calls, and then press the Resume soft

key to retrieve the desired call.

When you are not in another call, you can answer a call in three ways:

Note

Using the handset

Using the speakerphone

Using the headset

You can ignore incoming calls by pressing the Reject soft key or the Silence soft key. You

can also activate Do Not Disturb mode to ignore all incoming calls without ring on your

phone. For more information, refer to

Do Not Disturb (DND) on page 71.

You can forward incoming calls to someone else by pressing the Fwd soft key. For more

information, refer to

Call Forward on page 72.

Answering When Not in Another Call

Call duration and destination will always appear on the LCD screen for the active call.

To answer a call using the handset:

Pick up the handset.