Quick Start Guide
Table Of Contents
- 6-32 x 3/4 in × 6
- M3.5 x 25mm × 4
- T4 x 6mm × 6
- M3 x 6mm × 6
- 2 Power on the RoomPanel
- 3 Installation
- 4 Remove the RoomPanel
- Operating Ambient Temperatures
- Warranty
- Restriction of Hazardous Substances Directive (RoHS)
- Safety Instructions
- General Requirements
- Environmental Requirements
- Cleaning Requirements
- ENVIRONMENTAL RECYCLING
- Always adhere to prevailing regulations
- Operating Requirements
- Contact Information
- About Yealink
- Technical Support
7
4
Remove the RoomPanel
1. You can directly pull the RoomPanel to disengage the
mounting bracket if the security latch has not be installed.
2. If the security latch has be installed:
a. Pull the RoomPanel away from the wall until it stops.
b. Use the screwdriver to rotate the latch to the opening position
which retracts the security latch arms.
c. Pull the RoomPanel to disengage it from the mounting bracket
with the arms retracted.
Use the screwdriver here
RoomPanel
Mounting
Bracket