User's Manual

ManualsBrandsYEALINK NETWORK TECHNOLOGY ManualsElectronicsHD IP Conference Phone

CP920

Quick Start Guide (V81.1)

www.yealink.com

IP Conference Phone

English | 简体中文

Applies to firmware version 78.81.254.29 or later.

Summary of content (16 pages)

PAGE 1
IP Conference Phone CP920 English | 简体中文 Quick Start Guide (V81.1) www.yealink.com Applies to firmware version 78.81.254.29 or later.
PAGE 2
FCC Statement This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 3
Table of Contents English ........................................................ 1 简体中文 .....................................................
PAGE 4
Packaging Contents E N G L I S H 7.5m Ethernet Cable IP Phone 2.5m Power Adapter Quick Start Guide Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance. Assembling the Phone 1. Connect the power and wired network. rne Inte DC1 2V t You have two options for network and power connections. Your system administrator will advise you which one to use.
PAGE 5
2. Connect the optional USB flash drive. E N G L I S H Startup After the IP phone is connected to the network and supplied with power, it automatically begins the initialization process. After startup, the phone is ready for use. You can configure the phone via web user interface or phone user interface. Welcome Initializing...
PAGE 6
Configuring Your Phone E N G L I S H Configuring via web user interface Accessing the web user interface: 1. Tap OK to obtain the IP address of the phone. 2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or “192.168.0.10”), and then press Enter. 3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm. Network Settings: Click on Network->Basic->IPv4 Config.
PAGE 7
Account Settings: Tap Settings->Advanced (default password: admin) ->Accounts to configure the account. E N G L I S H Basic Call Features Placing a Call do one of the following: - Tap . Enter the phone number, and then tap - , , or the Send soft key. Enter the phone number. Tap , or the Send soft key. , Answering a Call Tap or the Answer soft key. , Ending a Call Tap or the EndCall soft key. Call Mute and Unmute To mute a call: Tap , the mute key LED illuminates solid red.
PAGE 8
To record audio calls: 1. Tap the More soft key, and then tap the Start REC soft key during a call. 2. Tap the Pause REC soft key to pause recording,tap the Re REC soft key to resume recording. E N G L I S H 3. Tap the Stop REC soft key to stop recording . The record file will be saved. If you end a call or conference during recording, the record file will be saved automatically. Note: This feature is not available by default .For more information ,contact your administrator.
PAGE 9
Customizing Your Phone E N G L I S H Local Directory To add a contact: 1.Tap the Directory soft key from the Idle screen. 2.Select Local Directory,then enter All Contacts. 3.Tap the Add soft key to add a contact. 4.Enter a unique contact name in the Name field and contact numbers in the corresponding fields. 5.Tap the Save soft key to accept the change. To edit a contact: 1. Tap the Directory soft key from the Idle screen. 2. Select Local Directory, then enter All Contacts. 3.
PAGE 10
包装清单 7.5米以太网线 2.5m线长电源适配器 IP会议电话说明：我们推荐使用由Yealink提供或经Yealink认可的配件，使用未经认可的第三方配件可能会导致性能的下降。安装电话 1.
PAGE 11
2. 连接U盘（可选）：启动在话机连接上网络和电源后，话机自动启动。启动完成后，话机能正常使用。你可以通过 Web界或话机界面配置话机。 Welcome Initializing...Please wait 硬件介绍 1 1 麦克风 2 2 静音键 3 扬声器 4 LCD显示屏 5 软键 6 挂机键 7 触摸板 8 音量(+)触摸键 Welcome 简 Initializing...
PAGE 12
配置话机通过Web界面配置话机访问Web界面： 1.在话机空闲时，按OK查看话机的IP地址。 2.打开电脑上的网页浏览器，在地址栏里输入话机的IP地址。（例如：http://192.168.0.10或192.168.0.10），按 Enter键。 3.
PAGE 13
5. 如果要连接一个加密的网络，在密码区域中输入密码。 6. 按连接。账号配置：在话机空闲时，按设置->高级设置（默认密码：admin）->账号。基本功能拨打电话使用下面的任意一种方式拨打： - 按。输入号码，然后按 - 输入号码。按，，，，或发送软键。或发送软键。接听电话按应答。结束通话按挂断。静音或取消静音开启通话静音：在通话中，按触摸屏上的。静音键的LED灯红色常亮。取消通话静音：再次按触摸屏上的。静音键的LED灯绿色常亮。通话保持和恢复通话保持：在通话中，按保持。恢复通话：按恢复。会议话机最多支持五方会议。创建会议： 1. 在通话中，按会议。 2. 输入第二个成员的号码，按发送。你也可以从话簿中选择联系人加入会议。 4.
PAGE 14
通话录音你可以录制音频通话，然后将录音文件保存在话机或U盘上。录制音频通话： 1. 在通话中，按更多，然后选择开始录音。 2.按暂停录音录音暂停，按恢复录音录音恢复。 3. 按停止录音录音结束，录音文件自动保存。如果你结束通话，录音将在通话结束时自动保存。呼叫转移你可以转移当前来电，或转移所有来电。转移当前来电： 1. 在来电界面，按转移。 2. 输入你希望转移到的号码。你也可以从话簿中选择一个联系人。来电将直接转移到该联系人。 3.按转移。转移所有来电： 1. 按菜单软键进入设置。 2. 在功能区域中选择呼叫转移。 3. 选择呼叫转移的类型：无条件转移----话机的所有来电，将被无条件自动转移到预先指定的号码。遇忙转移------当话机忙时，来电将被转移到预先指定的号码。无应答转移----当话机在指定的响铃时间内无应答时，来电将被转移到预先指定的号码。 4. 打开相应的开关。 5. 输入你希望转移到的号码。 6. 如果选择无应答转移，在响铃时长区域选择转移前等待的响铃时间。 7. 按保存保存操作。通话转接你可以使用下述三种方式将通话转接到另一方：盲转 1.
PAGE 15
自定义话机联系人添加联系人： 1. 在空闲界面，按话簿。 2. 按本地联系人进入所有联系人。 3.按添加添加联系人。 4. 在姓名区域输入联系人姓名，在相应的区域输入联系人号码。 5. 按保存操作。编辑联系人： 1. 在空闲界面，按话簿。 2. 按本地联系人进入所有联系人。 3. 选择需要的联系人，按选项操作进入详情。 4. 编辑联系人信息。 5. 按保存操作。删除联系人： 1. 在空闲界面，按话簿，选择本地联系人中的所有联系人。 2. 按联系人后的选项，然后按删除。 3. 显示屏弹出“删除选中条目？”，按确定删除联系人。说明：你可以从话单中添加联系人。了解更多信息，请参考话单章节。话单 1. 在空闲界面，按话单。 2. 进入所有通话，然后选择相应的通话记录列表。 3.
PAGE 16
About Yealink Yealink (Stock Code: 300628) is a global leading unified communication (UC) terminal solution provider that primarily offers video conferencing systems and voice communication solutions. Founded in 2001, Yealink leverages its independent research and development and innovation to pursue its core mission: “Easy collaboration, high productivity.” The company’s high-quality UC terminal solutions enhance the work efficiency and competitive advantages of its customers in over 100 countries.