User Manual

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
76
Tone field.
4. (Optional.) Enter the call waiting on code in the CW On Code field.
5. (Optional.) Enter the call waiting off code in the CW Off Code field.
6. Press the Save soft key to accept the change.
Auto redial allows IP phones to redial a busy number after the first attempt. Both the
number of attempts and waiting time between redials are configurable.
Procedure
Auto redial can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure auto redial feature.
For more information, refer to
Auto Redial on page 296.
Local
Web User Interface
Configure auto redial feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Phone User Interface
Configure auto redial feature.
To configure auto redial via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Auto Redial.
3. Enter the waiting time in the Auto Redial Interval (1~300s) field.
The default waiting time is 10s.