User Manual

Configuring Basic Features

Live dialpad allows IP phones to automatically dial out the entered phone number after

a specified period of time.

Procedure

Live dialpad can be configured using the configuration files or locally.

Configuration File

<y0000000000xx>.cfg

Configure live dialpad.

For more information, refer to Live

Dialpad on page 294.

Local

Web User Interface

Configure live dialpad.

Navigate to:

http://<phoneIPAddress>/servlet

?p=settings-preference&q=load

To configure live dialpad via web user interface:

1. Click on Settings->Preference.

2. Select the desired value from the pull-down list of Live Dialpad.

3. Enter the desired delay time in the Inter Digit Time (1~14s) field.

4. Click Confirm to accept the change.

Call waiting allows IP phones to receive a new call when there is already an active

call. The new incoming call is presented to the user visually on the LCD screen. Call

waiting tone allows the phone to play a short tone, to remind the user audibly of a

new incoming call during conversation. Call waiting tone works only if call waiting is