User Manual

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
vi
 Chapter 4, “Configuring Advanced Features” describes how to configure the
advanced features on IP phones.
 Chapter 5, “Configuring Audio Features” describes how to configure the audio
features on IP phones.
 Chapter 6, “Configuring Security Features” describes how to configure the security
features on IP phones.
 Chapter 7, “Upgrading Firmware” describes how to upgrade firmware of IP
phones.
 Chapter 8, “Resource Files” describes the resource files that can be downloaded
by IP phones.
 Chapter 9, “Troubleshooting” describes how to troubleshoot IP phones and
provides some common troubleshooting solutions.
 Chapter 10, “Appendix” provides the glossary, reference information about IP
phones compliant with RFC 3261, SIP call flows and the sample configuration files.
This section describes the changes to this guide for each release and guide version.
The following section is new for this version:
 Power Indicator LED on page 40
Major updates have occurred to the following sections:
 DHCP on page 21
 Replace Rule on page 33
 Dial-now on page 34
 Contrast on page 42
 Backlight on page 43
 Time and Date on page 50
 Key as Send on page 64
 Anonymous Call on page 81
 LDAP on page 139
 Busy Lamp Field on page 142
 Action URL on page 163
 IPv6 Support on page 196
 Transport Layer Security on page 211