User Manual

Getting Started

?p=settings-areacode&q=load

To configure an area code rule via web user interface:

1. Click on Settings->Dial Plan->Area Code.

2. Enter the desired values in the Code, Min Length (1-15) and Max Length (1-15)

fields.

3. Enter the desired line ID in the Account field or leave it blank.

If you leave this field blank or enter 0, the area code rule will apply to all accounts

on the IP phone.

4. Click Confirm to accept the change.

Block out rule prevents users from dialing out specific numbers. When entered numbers

match the predefined block out rule, the LCD screen prompts “Forbidden Number”. IP

phones support up to 10 block out rules.

Procedure

Block out rule can be created using the configuration files or locally.

Configuration File

<y0000000000xx>.cfg

Create the block out rule for the

IP phone.

For more information, refer to Dial

Plan on page 269.

Local

Web User Interface

Create the block out rule for the

desired line.

Navigate to:

http://<phoneIPAddress>/servlet