User Manual

Getting Started

The dash “-” can be used to match a range of characters within the

brackets. Example:

“[5-7]” would match the number “5”, ”6” or ”7”.

The comma “,” can be used as a separator within the bracket.

Example:

“[2,5,8]” would match the number ”2”, “5” or “8”.

[]

The square bracket "[]" can be used as a placeholder for a single

character which matches any of a set of characters. Example:

"91[5-7]1234"would match “9151234”, “9161234”, “9171234”.

()

The parenthesis "( )" can be used to group together patterns, for

instance, to logically combine two or more patterns. Example:

"([1-9])([2-7])3" would match “923”, “153”, “673”, etc.

The “$” followed by the sequence number of a parenthesis means

the characters placed in the parenthesis. The sequence number

stands for the corresponding parenthesis. Example:

A replace rule configuration, Prefix: "001(xxx)45(xx)", Replace:

"9001$145$2". When you dial out "0012354599" on your phone, the IP

phone will replace the number with "90012354599". “$1” means 3

digits in the first parenthesis, that is, “235”. “$2” means 2 digits in the

second parenthesis, that is, “99”.

Replace rule is an alternative string that replaces the numbers entered by the user. IP

phones support up to 100 replace rules, which can be created either one by one or in

batch using a replace rule template. For more information on the replace rule template,

refer to Replace Rule Template on page 229.

Procedure

Replace rule can be created using the configuration files or locally.

Configuration File

<y0000000000xx>.cfg

Create the replace rule for the IP

phone.

For more information, refer to Dial

Plan on page 269.

Local

Web User Interface

Create the replace rule for the IP

phone.

Navigate to:

http://<phoneIPAddress>/servlet

?p=settings-dialplan&q=load