User Manual

Getting Started
25
 Default Gateway
 Primary DNS
 Secondary DNS
Procedure
Network parameters can be configured manually using the configuration files or
locally.
Configuration File
<y0000000000xx>.cfg
Configure network parameters of
the IP phone manually.
For more information, refer to
Static Network Settings on page
261.
Local
Web User Interface
Configure network parameters of
the IP phone manually.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network&q=load
Phone User Interface
Configure network parameters of
the IP phone manually.
To configure the IP address mode via web user interface:
1. Click on Network->Basic.
2. Select desired value from the pull-down list of Mode (IPv4/IPv6).
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click OK to reboot the IP phone.