User Manual

Appendix
361
query.
X ranges from 1 to 6.
Format
Integer
Default Value
0
Range
Valid values are:
0-UDP
1-TCP or TLS.
Example
account.1.naptr_build = 0
Parameter-
network.lldp.enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables LLDP feature on the IP
phone.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Disabled
1-Enabled
Example
network.lldp.enable = 1
Parameter-
network.lldp.packet_interval
Configuration File
<y0000000000xx>.cfg
Description
Configures the amount of time (in seconds)
between the transmissions of LLDP packet.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It works only if the parameter
“network.lldp.enable” is set to 1 (Enabled).
Format
Integer
Default Value
60