User Manual

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
352
Default Value
G722
Range
Valid values are:
 PCMU
 PCMA
 G729
 G722
 G726-16 (not applicable to SIP-T21P)
 G726-24 (not applicable to SIP-T21P)
 G726-32
 G726-40 (not applicable to SIP-T21P)
 G723_53
Example
multicast.codec = G722
Parameter-
multicast.receive_priority.enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to handle
the incoming multicast paging calls when
there is an active multicast paging call on
the IP phone.
If it is set to 1 (Enabled), the IP phone will
answer the incoming multicast paging call
with a higher priority and ignore that with a
lower priority.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Disabled
1-Enabled
Example
multicast.receive_priority.enable =1
Parameter-
multicast.receive_priority.priority
Configuration File
< y0000000000xx >.cfg
Description
Configures the priority of multicast paging
calls.